asebomonkey.blogg.se

Synology Domain Name
synology domain name













synology domain name

Synology Domain Name Free Dynamic One

In your Synology device click Control Panel. Table of ContentsBelow is a step by step guide on how to enable dynamic DNS in your Synology device. This can either be with a official domain name or a free dynamic one. Mount -t cifs /// /mnt (or other mount.In this guide we will be setting up our synology for remote access.

Login into your DSM with an administrator account This only applies if your Synology does not have a static IP assigned yet Once enabled, DDNS provides a fixed domain name (like jeffcarlson.example.com). This will allow you to forward the external connection from the internet to your Synology.Here are the broad strokes, again using my Synology NAS as an example. Password: Input your No-IP In order to access your Synology NAS externally first thing you have to setup is a static IP. Select No-IP from the drop-down menu showcasing the Service Providers and input your No-IP account information.

Choose a Service Provider if you're unsure choose, Synology Dynamic DNSSetting up external access with a dynamic DNS is quite easy with Synology DSM.Please note that if you're Synology is unable to determine your external IP you might have to go the to obtain your own public IP address.In order to configure a dynamic IP follow the following steps. What you need to do is to configure your router firewall and NAT port forwarding to allow network traffic from the internet to your Synology NAS and forward this traffic from the internet to the static IP number of your Synology.You have to forward the following traffic TypePlease note that UDP is not explicitly requiredYou might have to consult the documentation of your router.This guide will be updated on how to achieve this with a Synology Router running SRM. After restart your Synology should now be accessable in your home network from the assigned IP number.This part is actually out of scope of this guide.

After a few seconds it should say in the column Status NormalConfiguring your NAS to work with an official domain name can be a little more difficult because it does require some configuration with an official provider.I will not be listing the actual configuration because this will be different for each hosting provider which provides a DNS redirect service.In order to set it up you are required to obtain the following. Agree to the Terms of Service and click OK In `External address(IPv4) it should show your public IP, if there is not a public IP you should go to obtain your public IP and use Set External IP to configure it. Set Heartbeat to Enable this will configure the Synology service provider to check if your NAS is online and available.

...synology domain namesynology domain name